Mon, 6 Aug, 2018 at 11:11 PM
Tue, 7 Aug, 2018 at 12:28 AM
Prints not Sticking or Sticking too Well Key Points: Adhesion Options Build Plate - Level and Clean Print Head Tight, Clean and Clear Cura Setting...
Tue, 7 Aug, 2018 at 12:30 AM
Generally there is only 2 reason for feeder (extruder) to grind a 'bite' out of the filament : Feeder tension is to high - Should always be se...
Tue, 7 Aug, 2018 at 12:48 AM